Sonoma Wire Works - Support Forums

by **mcmanusrichard** » Mon Apr 23, 2007 2:57 am

I have used RiffWorks 1 alot and had no problems with it. RiffWorks 2.1 upgrade was loaded and I can't hear any guitar or any input. The meter shows a minimal signal but no sound. Drum tracks come out fine. I have tried listening with headphones into the guitarport headphone jack as well as monitor speakers. Any Ideas not mentioned in previous threads?
Thanks

by **Hayden** » Mon Apr 23, 2007 4:37 am

Hi Richard,

You'll want to update your Line 6 software for your audio device as well. I assume you're using the Line 6 Edition of RiffWorks with a Guitarport or a PODxt. Download Gearbox 3.10 from http://www.line6.com/software

That will install the latest drivers for use with RiffWorks 2.1.

Also, RiffWorks 1 loaded Guitarport along with RiffWorks. RiffWorks 2.1 does not do that. You must launch Gearbox (the new Guitarport software) as a separate application in order to hear your guitar tone.

Hayden

by **mcmanusrichard** » Mon Apr 23, 2007 4:58 am

Thanks Hayden. I did get the Gearbox a while ago so I'll give it a try tonight.

by **Sandman** » Mon Apr 23, 2007 7:04 pm

I'm having an issue with no sound. It crashed, and when I brought it back up the meters register and all looks fine, except no sound what so ever. This happened before, and I uninstalled and re-installed & updated. it worked after that. But this time after re-installing, no sound. Any ideas?

Do I loose any drivers when I uninstall? Using toneport ux1.

by **camaro24gold** » Mon Apr 23, 2007 7:09 pm

Try maybe unplugging and repluging in the USB. Also if that doesn't do it try a reboot. Sometimes this works for some of the people here that have run across this.

by **Sandman** » Tue Apr 24, 2007 2:44 am

yup. It worked Thanks!!!

by **bennydahl** » Mon Apr 30, 2007 10:07 pm

Hi everyone
A while ago I installed RiffWorks with a demoversion og GuitarRig 2 and everything worked fine. Since then I bought a full version of GuitarRig 2 and installed it. Now RiffWorks crash when I try to activate it through the Amp setting in RiffWorks.
Any tips?
Benny Dahl
Copenhagen

by **Hayden** » Tue May 01, 2007 8:06 pm

Hi Benndahl,

Please use this support form and I'll pass your case onto the engineering department.

http://www.sonomawireworks.com/support_form.php

Hayden

by **mcmanusrichard** » Wed May 02, 2007 1:04 pm

Hey Hayden,
I tryied it and it worked great. thanks

by **dug** » Wed May 02, 2007 5:46 pm

Hi bennydahl,

I initially tested RiffWorks with the demo version of GuitarRig and everything worked just like you describe. Then I got the full version and it had some weird bugs. I fixed a couple of them for 2.1 but there are more. NI has some copy protection in GuitarRig that makes it so I can't load the plug-in while I'm using a debugger. I met with them while we were at Musik Messe in Germany to ask if I could get a version that would let me fix the problem, but I haven't heard back yet.

cheers,
dug

Sonoma Wire Works - Support Forums

No guitar sounds with RiffWorks 2.1

Who is online