Sonoma Wire Works - Support Forums

by **Hemoglator2** » Mon May 21, 2007 3:43 am

Hey folks,
Its been a while since I've been around, been real busy at work. Any way I just got around to updating gear box tonight and now I have no guitar port!!!
Any help appreciated and thanx ahead of time.
Peace Bryan.

by **scott** » Mon May 21, 2007 7:17 am

GearBox IS GuitarPort (well software-wise) - just updated so that one interface works with all of the Line6 hardware. Load GB, plug in your GP and it should work fine.

by **Hemoglator2** » Mon May 21, 2007 1:56 pm

Scott,
Thanks for the reply but thats not quite the problem. I understand that guitar port is gear box, but now that I have updated to 3.10 it does not work at all. all I have is the red light.
Bryan

by **scott** » Mon May 21, 2007 5:10 pm

Try a couple of things.

1) Make sure you download the latest Line6 Monkey (1.16). It will make sure you have all of the latest software/driver versions.

2) Unplug and replug in your GP.

My RiffWorld Profile · by **randy** » Mon May 21, 2007 10:03 pm

Hi Hemoglator,

Scott's advice is spot on. I'll just add that if that doesn't work, use the Line 6 Monkey to confirm that your GuitarPort's firmware is also current.

Let us know how this works out,

by **Hemoglator2** » Mon May 21, 2007 10:32 pm

Hey Scott & Randy,
I do have monkey 1.6 and it says every thing is up to date.
Everything was working just fine with gearbox 3.0 then when I updated to 3.10 now I have a red light. I had it unpluged from usb when updating,pluged and re-pluged,restarted my computer several times all to no avail. Any other Ideas?
Thanks Bryan.

My RiffWorld Profile · by **randy** » Mon May 21, 2007 10:38 pm

Hi Bryan,

Sounds like you've done everything correctly. You should be able to go to Add/Remove programs in the Windows Control Panel and remove the 3.1 drivers to revert to the 3.0 drivers. Give that a try and see if it works again.

You may need to contact Line 6 directly to see if they have any ideas about what's going on here. If you do that, please report back here and let us know what's going on.

Cheers,

by **strat** » Mon May 21, 2007 10:40 pm

Dont know if this will help..but i had a problem after updating to the 3.10 version..the 3.10 driver was downloaded but not installed,,dont know why..i went where the driver was[some folder?] and clicked install..everything worked fine after that..maby this might help..

by **Hemoglator2** » Tue May 22, 2007 2:52 am

Hey every one,
Thanks for your responses, I finnaly went to the device manager and reinstalled the drivers and now am up and running!!!! YEAAAAA!!!!!!
Peace Bryan.

by **scott** » Tue May 22, 2007 6:49 am

Good job. Don't forget that you can use Amplitube Live amp models with RWS too. I find that using both for recording makes a great mix as they each have very distinctive tones.

by **Hemoglator2** » Wed May 23, 2007 2:22 am

Hey scott,
Whats this amplitube live and where do I get it?
Bryan

by **mickeymix** » Wed May 23, 2007 6:07 am

Go to the Store and log in....Click My Account.....click view or download software..............it should be under your downloads........download and install .....enjoying the appropriate beverages....
MMMMmmmmmmmm Beverages!!! (PG version)

by **Wedgebill** » Wed May 23, 2007 7:29 am

MMMMMMmmmmmmm........................Beverages ?????

You swallowed a dictionary Mickey ?????

Uncle Bill :rolleyes:

Sonoma Wire Works - Support Forums

Just updated gearbox and now no guitarport!!!!!!!

Who is online