Input Channel

From Guide

Select the input channel from the menu at the far left of the Input Panel.

Stereo

• If the STEREO Button is on, then the Input Channel menu will show channels in pairs.
• If you turn the STEREO button off, then the menu will show the individual channels separately.

Meters

• The Input Meters show the level coming directly from the input device.
• Use the level control on your hardware, or in it's software control panel to adjust it.
• The ideal level is to have the first amber LED lit. If the level is lower than that, you will be losing available resolution.
• If the Red LED comes on, your signal is clipping before it get's to RiffWorks.